Cranksets

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

We’ve fit the same outstanding stiffness, durability and weight savings of the eeWings mountain cranks into the slimmer road bottom bracket standard. This includes road, gravel and cyclocross configurations. - eeWings All Road 170mm, 172.5mm or 175mm - 30mm Spindle - 10 Year Warranty"

Genuine replacement parts Original replacement crank arms for your Electra. Product details: - Compatible with 1/2'' pedals - Bottom bracket not included

Genuine replacement parts Replacement crank arms for your Hydrive-equipped bike. Product details: - Arms only - Chainring sold separately

Genuine replacement parts The crankset you need. Product details: - Suitable for square tapered bottom bracket - Mounting hardware not included - For OE replacement purposes only - not intended for aftermarket installation

Genuine replacement parts The crankset you need. Product details: - Suitable for square tapered bottom bracket - Mounting hardware not included - For OE replacement purposes only - not intended for aftermarket installation

Genuine replacement parts Original replacement crankset for your Electra. Product details: - Compatible with square taper bottom brackets - Mounting hardware not included

Genuine replacement parts Original replacement crankset for your Electra. Product details: - Compatible with square taper bottom brackets - Mounting hardware not included

Genuine replacement parts Original replacement crankset for your Electra. Product details: - Original equipment for Electra Cruiser Go! Models - For use with square taper bottom brackets

Genuine replacement parts Original replacement crankset for your kid's Electra. Product details: - Compatible with square taper bottom brackets - Compatible with 1/2 x 1/8 chains - Mounting hardware not included

Genuine replacement parts Original replacement crankset for your Electra. Product details: - Compatible with square taper bottom brackets - Mounting hardware not included

Genuine replacement parts Original replacement crankset for your Electra. Product details: - Compatible with square taper bottom brackets - Mounting hardware not included

Genuine replacement parts The right parts for the right bike. Product details: - Designed for use with BEP torque sensor - Square taper interface

- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x

RaceFace Crank Arm Fixing Bolts - M15

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

RaceFace CINCH Crank Bolt and Puller Cap Sets

Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

CINCH Crank Bolt with Washer

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Self-extracting

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

RaceFace CINCH Crank Bolt and Puller Cap Sets.

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Not self-extracting