Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

CycleOps Trainer Skewer
$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Stan's NoTubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$8.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
Salsa Deadbolt Ultralight Thru-Axle
$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation
evoc ROAD WHEEL BAGS
$124.99
Transport your wheels safely and stylishly with the EVOC ROAD BIKE WHEEL CASE. Perfectly adapted, the cases also fit in the wheel bags of our bike bags BIKE TRAVEL BAG and BIKE TRAVEL BAG PRO. - Axle protection - Necessity pocket (separate) - Carry handles - 2 bags included
WTB TCS Rim Tape
$14.95 - $19.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
DT Swiss Prolock Hexhead Alloy Nipples
$0.50
- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100
Sunlite BB Axle Bolt
$2.50
- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt
Sunlite 3-Speed Anchor Adjuster
$3.50 - $5.09
- Replacement adjustable nut for three-speed internal hubs.
WeThePeople Dill Pickle Peg Sleeve
$8.99
Replacement sleeve for the Dill Pickle Peg - Length: 4.5" - Diameter: 1.5" - Material: Nylon/fiberglass compound
WeThePeople Helix Rear Hub Axle/Cone Set
$35.99
Helix Rear Hub 14mm Axle/Cone Set
WeThePeople Supreme Hub Guards
$23.99 - $36.99
Simply replace the cones on your Supreme front and cassette hubs for a perfect fit without having to spread your dropouts. Available in front, rear, and drive side options. These guards now feature a heat-treated chromo insert for longer life.
Dimension Freehub Spoke Protector
$6.99
Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes
Race Face Vault End Cap Set
$20.00
Race Face Vault Endcap Set for Vault 414 and 412 hubs.
Dimension Freewheel Spoke Protector
$6.99
Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads
Surly Ultra New Hub Stainless Knurled Axle End Cap
$10.00
- Replacement part for Surly hubs
WeThePeople Nylon Rim Tape
$6.99
You need rim tape to keep your tubes from blowing through the spoke holes, especially when landing big airs. WeThePeople's got your back, though. If your's is questionable, you better replace it with this WTP Nylon Rim Tape, a perfect fit with Logic Rims. - Strong - Lightweight - Tube-proof
WeThePeople Helix Freecoaster Hub
$154.99
WeThePeople took the tried and tested features from the best freecoasters to date and then developed their very own patented 3 point clutch friction system, making the Helix Freecoaster the most durable and reliable free coaster of its kind. Paired up with a pair of WTP plastic hub guards, the Helix will roll front or back like butter and hold up to any peg abuse that comes its way. - 9T driver - 14mm axle
WeThePeople Arrow Front Hub Female Bolt Set
$29.99
Keeping the front wheel securely on the bike is kinda important. This WeThePeople Arrow Front Hub Female Bolt Set keeps your wheel right where it belongs. Sticking the nose manual is up to you.
WeThePeople Arrow Front Hub Bearings
$23.99
Did you trash the front bearings on your WeThePeople Arrow front hub? It happens, that just means you're riding a lot. Fear not, we've got you covered with this bearing set from WeThePeople.
Salsa Rear Stainless Flip-Off Skewer
$36.00
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
Zipp Tangente Quick Release Skewer Set
$49.00 - $88.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set
Wheels Manufacturing Inc. CN-R096 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.7mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Ultegra 6400 Front - Shimano 105 HB-5500 Front - Shimano 105 HB-5501 Front - 105 SC 6400 Front
Wheels Manufacturing Inc. CN-R097 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Left Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Cone Diameter: 17.0mm - Dust Seal Diameter: 25.5mm - Length: 16.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear
Wheels Manufacturing Inc. CN-R024 Cone
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag Note: O-ring / seal not included. Check the seal groove closely. This cone has a narrower groove than cone CN-R002. COMPATIBLE HUBS: - 105 FH-5700, 9 speed (right side cone) - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - Deore LX M550, 7 Speed Rear - Deore Mtn LX M550, 7 Speed Rear
Spank Oozy/Spike Rear Hub Adaptors
$20.00 - $21.00
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
WeThePeople Dill Pickle Dillon Lloyd Signature Peg
$21.99
Introducing the Dillon Lloyd signature "Dill Pickle" peg. Using a heat treated 7075-T6 alloy core with a specially designed nylon/fiberglass sleeve for long life and less resistance, these sweet sticks are on the longer side at 4.5" and are guaranteed to keep you grinding on, and on and on... - Size: 114mm/4.5" long, 38.5mm diameter - Replacement sleeves sold separately - 133g/4.7oz each peg (pegs sold individually)
Problem Solvers Booster
$19.99 - $24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
Shimano Alfine SG-S700 Right Hand Cone
$7.00
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
Shimano Alfine SG-S700 11-Speed Internal Assembly
$384.99
This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub. - 187mm axle width
Page 1 of 8 Next page