Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.
The iconic, progressive, and popular NEO 2 Smart is optimized with an even quieter and more powerful Smart direct drive. The motor is redesigned in order to provide a better indoor cycling experience and ride feel, especially during climbs and sprints. The NEO 2T Smart is more silent then ever thought possible and is, without question, the most powerful, realistic, and accurate bike trainer to date. - Improved air and mechanical stillness results in a nearly silent smart bike trainer with power and cadence accuracy within 1% - New motor design creates enhanced ride feel during climbs and acceleration and when riding at low speed or cadence - Now enables accurate pedal stroke analysis via compatible third-party software and Edge bike computers - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride - Road feel feature lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES Type of trainer: Interactive Smart direct-drive with motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Main power optional Power indicator: Multicolor LED, Spot on floor Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 – 12 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 575 × 750mm (22.6 × 29.5 in) Height: 550mm (21.7 in) Dimensions when folded: 620 × 260 × 440mm (24.4 × 10.2 × 17.3 in) Weight: 21.5 kg (47.3 lbs) Article number: T2875 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <1%
Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps
Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion. - Measure your power within 3% error tolerance - Next-to-silent direct drive trainer lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts - Sturdy design easily allows for riding full-out and standing on the pedals FEATURES Type of trainer: Interactive Smart direct drive with electric brake Magnets: 8 Permanent ferrite magnets & 8 electromagnets Transmission: None Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available. Suitable bikes: Race, Tri, & MTB Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 1500 Watt Max. incline: 10% Simulation of descent: No Max. torque: 22.1 Nm Max. brake force: 65 N Flywheel: 7kg Mass inertia: 22.8kg (50.3 lbs) Calibration: Spin down Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in) Height: 460mm (18.1 in) Weight: 22.8kg (50.3lbs) Article number: T2900S DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <3%
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
$54.00 - $65.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
This Revolutionary Smart bike trainer is designed to create an unprecedented, one of a kind, and immersive experience. It is equipped with vivacious features like Virtual shifting, Gear Feel, and descent simulation. It is, without question, the most innovative smart bike offering the most realistic cycling experience possible, and it is compatible with most popular applications like Tacx, TrainerRoad, and Zwift. Realistic, As it Should Be Simulating your outdoor ride indoors is what this Smart bike trainer is designed for. With Dynamic Inertia, Road feel, and Gear feel, the Tacx NEO Bike brings you the most realistic and smooth cycling feeling possible. Extremely Quiet The combination of NEO Smart technology and the internal design of the NEO Bike resulted in the most silent indoor bike trainer available. Incredibly Powerful Unmatched power. The NEO Bike is able to resist sprints up to 2200 watts and simulate climbs up to a 25% incline, making sure this trainer is able to deliver during the most intense training sessions. Accurate and Reliable The Tacx NEO Bike measures your power with incredible precision, making sure that your data is accurate and reliable. This Smart trainer is the only trainer that doesn't require a calibration process. It measures your power with a a maximum deviation of 1%. Dynamic Inertia Dynamic inertia is developed to control the mass inertia (ride feel) as realistically as possible. In contrast to the mass inertia of a flywheel, Dynamic inertia compensates for weight, speed, and angle of inclination. This ensures the most realistic and smooth ride feel. Customization Pedals, saddle, (tri)handlebar, bar tape, and crank lengths 4.5" Display Shows your data and allows for easy setup and manual control Control Buttons Change the setup or manually control the trainer 2 USB Chargers Power up your smartphone or tablet Plug In/Plug Out Choose to train with or without main power Isokinetic & Isotonic Train on a fixed speed or power level Interactive Air Fans The two air fans on the handlebars of the NEO Bike are interactive, the air flow will adjust to speed, power, or heart rate. The air flow can also be set at a constant speed. Realistic Virtual Shifting Like your road bike, the NEO Bike is able to shift gears. By pressing the up or down buttons on the shifters, you are able to change the gearing of your virtual drivetrain instantaneously. A clear display in the front shows which gear you're in. These virtual gears are customizable with the Tacx Utility App. Pedal Stroke Analysis The NEO Bike Smart measures the position of your left and right legs. This allows you to precisely measure and analyze your pedaling technique in order to develop a more effective pedal stroke. Road Feel & Gear Feel Experience the feeling of riding over cobblestones or shifting gears. The Road Feel and Gear Feel features simulate the vibrations of different road patterns, but also your virtual chain jumping into a different gear. This immersive feature is unique to the NEO trainer series and can be used with Tacx Films and Zwift. Descent Simulation At the top of a hill or mountain, there is always that exciting feeling of accelerating into a descent. Exactly that feeling is what this bike trainer gives you. The NEO Bike accelerates when on a descent. FEATURES Type of trainer: Smart bike with direct-drive and motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Main power optional Power indicator: Multicolor LED , Spot on floor Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Gear ratios: Chainrings: up to 3 sprockets, 22 – 53 teeth per sprocket. Rear cassette: up to 12 sprockets, 11 – 40 teeth per sprocket Q-factor: 147mm Supplied with: Fans, Tablet mount, Saddle, Handlebars, 2 USB chargers (front), Sweat cover, Ciro bottle cage, Bottle, Tacx towel, 1 month Tacx Premium software. Pedals and tablet sold separately SPECIFICATIONS Max. power (40 km/h): 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 1390 × 750mm (54.7 × 29.5 in) Height: 1170mm (46.1 in) Weight: 50 kg (110 lbs) Article number: T8000 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+ antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error tolerance: <1%
For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%
The Galaxia is an advanced roller. The patented swing system allows it to absorb the forward and backward accelerations perfectly, ensuring that you do not ride off the rollers. The Galaxia can be retracted to 80 cm. Patented Swing System The Galaxia relies on a swing system that ensures the rollers can swing forward and backward. When you start to sprint, switch pace fast, or stand on the pedals, this system absorbs the sudden forward or backward movement so you do not derail. Conical Rollers The Tacx rollers are conical which ensures that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350×500mm(53×19.7 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 500 × 135 mm (31.5 × 19.7 × 5.31 in) Weight: 8.2 kg (18.1 lbs) Article number: T1100
Love training when you travel? Need an awesome warm-up and cool-down during weekends at the races? Want to crush that indoor bike trainer workout in a small living space? Meet the Omnium Over-Drive Portable Bike Trainer. The adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any stationary bike trainer available. Plus the precision rollers and internal progressive resistance design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides it in its padded tote like it was never there. Add a Sweat Guard and Trainer Mat and you’re armed with the complete training package. - Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer - Patented, Internal Progressive Resistance via friction-less Eddy Current - Parabolic, progressive resistance curve accurately simulates outdoor cycling (rolling + wind resistance) - Adaptable fork-mount and adjustable sled design (16”-29” wheel; Thru-Axle and QR compatible) - Lightweight design for a complete bike trainer system – 14lb (6.35kg) - Precision machined 4” aluminum rollers create a smooth and quiet ride - Included fork adapters: - 9mm Quick-Release - Thru Axle: 12×100mm, 15×100mm & 15×110mm - Available fork adapters: - Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike) - Adaptable to virtually any bike size and geometry (up to 1348mm wheelbase with optional extender) - Maintenance-free resistance unit and roller bearings - Includes heavy-duty tote bag for easy transport and storage - Compatible with cycling apps: Zwift, The Sufferfest, TrainerRoad and Kinomap traditional trainer features* - Patent number: 9,393,475 *Requires ANT+ or BT rear wheel speed sensor
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our absorbent Sweat Guard is designed to keep your carbon, aluminum and steel frame and components safe from corrosive sweat while mimicking your favorite spin class at home. And because your cycling training plan asks for incredibly intense efforts, the Sweat Guard ensures not a drop of sweat will hit your frame during leg-busting intervals. Add a Floor Mat to your indoor cycling collection and you’ve got a training party! - Ultra absorbent terry cloth material - Protects carbon, aluminum, and steel frames and components - Adjustable to fit most any bike - Simple setup and removal with Velcro handlebar mounts and elastic seatpost strap - Machine washable, cold
From the world leader in power, Stages Cycling brings the experience of riding outdoors to your home with the StagesBike. Designed by the indoor cycling experts with a fitness-studio-quality, Stages Indoor cycling frame provides unsurpassed stability and durability and a quiet, maintenance-free Gates Carbon belt drive for countless miles of trouble-free indoor riding. At the heart of the StagesBike is a smooth, silent, electronic resistance unit providing up to 2200 watts of stunningly realistic road feel, right down to each electronic gear change. An oversized flywheel makes climbing, acceleration and coasting feel spot on. Standard road bars and saddle are included—and both can be swapped for your personal favorites, including aero bars. StagesBike brake hoods incorporate electronic shift buttons and separate "sprint" buttons. Riders can customize the function of each button and choose between several virtual drivetrains, simulating a variety of popular bike setups. With functional brake levers and steering buttons, the StagesBike is ready for the evolution of indoor cycling. Precision power measurement comes from a Stages Gen 3 Dual-Sided power meter. Multiple Tour de France victories can't be wrong—this is the most reliable and accurate way to bring your watts to the world of Watopia and beyond. With micro-adjust saddle fore/aft adjustment and handlebar reach/stack with laser-etched sizing scales, adjustable brake hoods, and crank arm settings ranging from 165mm to 175mm, you can tune the StagesBike to precisely replicate the fit and feel of your favorite bike and get the most out of your indoor miles. The StagesBike is optimized for the most popular indoor cycling platforms including Zwift, Trainer Road, Sufferfest, and others, with ANT and Bluetooth connectivity for all control modes. Two USB charging ports keep your devices juiced up during your ride, and an integrated adjustable tablet holder makes it easy to see the action. - Bike Weight: 138lbs - Bike Dimensions: 62.2in x 22.2in x 46.7in - Drivetrain: CarbonGlyde featuring Gates Carbon Drive - Shifting: Configurable buttons—additional Sprint Shifters included + Ports for up to 2 additional shift locations - Frame: High-strength steel - Hardware: Stainless Steel - Flywheel: 50lbs - Connectivity: ANT+ and Bluetooth - Power: Stages Power LR—Dual-Sided Power - Accuracy: 1.5% - Max Power: 2200w @ 130RPM - Q-Factor: 157mm - Max Rider Weight: 300lbs - Rider Fit: 4'10"in—6'10"in - Two USB ports - Tablet & phone holder - Dual water bottle holders - Standard road bar (31.8 mm) with sprint shifters + Climbing and Aero shifters available for purchase - Compatible with Aero Bars + Aero shifters available for purchase - Compatible with four different crank lengths—165 mm, 170 mm, 172.5 mm, 175 mm (pedals not included) - Wireless Firmware Updates
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Protects the bicycle from sweat and avoids corrosions or rust. - Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish - Sits above the top-tube and can be adjusted for different bicycles - Washing-machine friendly
The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position. Compatible with tires up to 56mm wide
The Gel Block is an indispensable accessory for perfecting your position on the bike and provides a more natural feel to your training. - Reduces vibrations on the handlebars for more comfortable training - Non-slip Elastogel insert ensures maximum stability and alignment of the front wheel - Suitable for road and MTB
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Love riding when you travel? Weekends spent at the races? Or just want to be able to train in a small living space? Meet the Omnium Zero-Drive Portable Trainer. The foldable, compact and adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any trainer available. Plus it’s unique roller design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides in its padded tote like it was never there. Add a Sweat Guard and Floor Mat and you’re armed with the complete training package. - Zero Resistance is ideal for high-speed spinning and track cycling workouts - Adaptable fork-mount and sliding sled design (16”-29” wheel; thru-axle and QR compatible) - Lightweight 13.3lb (6.03kg) design makes it the ideal, portable cycling training partner - Precision machined 4.25” aluminum rollers create a smooth and quiet ride - Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer - Included fork adapters: - 9mm Quick-Release - Thru Axle: 12×100mm, 15×100mm & 15×110mm - Available fork adapters: - Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike) - Adaptable to virtually any bike size and geometry - Optional Sled Extension (up to 1348mm wheelbase with optional extender) - No tools required to assemble or store — simply unfold for cycling training and fold for storage and travel - Maintenance-free resistance unit and roller bearings - Includes heavy-duty, water- and abrasion-resistant tote bag for easy transport and storage
Top resistance unit, innovative frame: excellence renewed - 8 resistance levels adjustable by a practical selector on the handlebar. - Use the Misuro B+ sensor for compatibility with the My E-Training or third party apps. Tech info - Novo frame: integration of steel and technological plastic materials. - Magnetic resistance unit, very compact. - Maximum stability at high speeds or at maximum effort guaranteed by the absorbing structure of the frame. - Lifting of the bicycle is limited to the minimum. - Fast fixing system: the bicycle can be clamped and released with a single quick operation. - New adjustable support system, allowing an adequate and constant pressure between the roller and tire. - 30 mm diameter elastogel roller. - The training roller folds up easily and becomes compact for easy transport or storage when not in use. - Adapts to all wheels from 24" to 29".
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
- Replacement belt - Select model based on model/roller size and belt size
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Page 1 of 3 Next page